Metallized Polypropylene Film Capacitor (DC-Link) | Renewable Energy | Industrial Electronics | Automotive & EV

MCD

Metallized Polypropylene Film Capacitor (DC-Link)
MCD Metallized Polypropylene Film Capacitor (DC-Link) - DAIN Electronics
OVERVIEW

Overview

MCD is a DC-link film capacitor made with metallized polypropylene film in a rectangular plastic box (UL94V-0), sealed with epoxy resin. It is rated 500 / 600 / 800 / 900 / 1000 / 1100 / 1200 VDC, covers 1 μF to 140 μF, comes with 2 or 4 tinned leads, and offers high ripple current capability and self-healing. Case temperature range is -40°C to +105°C (derating above +85°C).

FEATURES

Features

Metallized polypropylene film membrane structure with a rectangular, plastic box-type design
Plastic shell package (UL94V-0), Epoxy resin sealing
Uses 2 or 4 tinned wires
High ripple current capability
Self-healing
DC-Link
APPLICATIONS

Applications

High performance DC filter applications (Direct-to-direct filter, Direct-to-AC filter, and AC-to-direct filter)
Inverter, industrial and high-end power supply, solar inverters, charging piles, etc.
SPECIFICATIONS

Specifications

Climatic Category 40 / 85 / 56
Temperature Range -40°C ~ +105°C (+85°C to +105°C: Decreasing factor 1.35% per °C for UN)
Capacitance Range 1μF ~ 140μF
Rated DC Voltage 500 / 600 / 800 / 900 / 1000 / 1100 / 1200 VDC
Capacitance Tolerance ±5%(J), ±10%(K)
Voltage Proof 1.5 × UNDC, 10s (cut-off current 10mA)
Insulation Resistance ≧10,000s (25°C, 100Vdc, 60 seconds)
Surge Voltage 1.5 × VNDC, maximum 10 times (25°C ±5°C)
Over Voltage 1.10 × UN (30% of load time, once per day) / 1.15 × UN (maximum 30 minutes, once per day) / 1.20 × UN (maximum 5 minutes, once per day) / 1.30 × UN (maximum 1 minute, once per day)
Self Inductance (Ls) <1nH per mm of lead spacing
Max Peak Current Î = C × dV/dt
TECHNICAL NOTE

What Is a DC-Link Capacitor?

A DC-link capacitor is connected across the DC bus between the rectifier (or DC source) and the inverter.

It keeps the DC bus voltage stable by smoothing ripple and acting as an energy buffer between the input and output stages.

MCD is designed for DC filter applications in inverters, industrial and high-end power supplies, solar inverters and charging stations.

FAQ

FAQ

What does "decreasing factor 1.35% per °C from +85°C to +105°C" mean?

Above a case temperature of +85°C, the rated voltage UN must be reduced by 1.35% for each °C; at or below +85°C the full rated voltage applies.

Is MCD available with 4 leads?

Yes. MCD is available with 2 or 4 tinned leads; please specify when requesting a quote.

Need Custom Specifications or Bulk Pricing?

Send your requirements to our sales team — our engineers will evaluate and recommend the best solution for your application.